This version is Mode 1/2 this heli version will default to helicopter settings,
    with mode 2 stick operation when powered up and has a non-ratcheted
    throttle stick.

 FEATURES: Futaba's FASST (Futaba Advanced Spread Spectrum Technology) 
             shifts very quickly virtually eliminating signal conficts and
             interruptions unlike other 2.4GHz systems that only stay on one
             or two frequencies
           Dual antenna diversity enables FASST system to automatically and
             seamlessly select the best reception between the two antennas
             built into the receiver ensuring that the aircraft stays under
             constant control of transmitter regardless of altitude
           Pre-Vision Packet Screening technology scans incoming data for
             potential problems and applies sophisticated error correction
             techniques for solid impenetrable link with model
           Easy Link system features a unique ID code in the transmitter that
             links to the receiver insuring that receiver only follows commands
             from this transmitter-with over 134 million possible codes there
             is no chance for a conflict
           No hassle Fail Safe programmed through transmitter-no complicated
             set-up steps or binding plugs
           When performing a ground check, the Power Down function allows
             modeler to reduce power from up to 50+ paces away-like retracting
             the antenna on a conventional transmitter
           Purpose built custom IC chips for key functions; no off-the-shelf 
           IC chip.

           One year limited warranty

   
INCLUDES: Futaba 10C Transmitter
               9.8V 700mAh NiCd Transmitter Battery
               1000mAh NiCd Receiver Battery
               R6014FS Receiver, FUTL7644
               Heavy-Duty Switch Harne
               Charger : 230v

REQUIRES: Servos depending on type of aircraft

SPECS:    Transmitter;
               Power Supply: 9.6V
               Receiver;
               Power Requirement: 4.8 - 6V

(LANGUAGE) : English , Deutsch ,French , EsPanol , Italiano ,Nederlands